The Ball Rescuer ball pressurizer consists of two threaded bodies made of plastic, a cap and a flange or clamp.
The lid is characterized by two valves, a main one for filling air and a secondary one for attaching a pressure gauge.
The lid also has a drain button so that you can open the bottle comfortably before using the balls.
In addition, the lid has a special O-ring inside that allows you to pressurize almost any container of balls on the market.
The flange is the piece that hugs the container and once placed around it, allows it to be threaded to the lid and pressurized.
Small Size, Light Weight, Easy Opening
Fits several brands of 3 or 4 ball containers.
See compatibility guide below.
It is capable of storing 3 or 4 balls at a pressure of up to 35 psi, extending their lifespan by up to 10 times.
Retrieves depressurized balls (caution that the process may take 2-3 weeks)
By playing two games a week, the investment pays for itself in three months.
In five years, it avoids the manufacture and subsequent disposal of 1,200 balls and 300 containers.
Save raw materials and reduce emissions.
Made of light and resistant material.
Easy to use.
Contains detailed pressurization instructions.
Patented, manufactured and assembled in Spain.
High Pressure
Ball Rescuer works at a pressure of 30/35 psi.
Screw-on pressurizers without valves that only give 14/16 psi do not work well.
In addition, the Ball Rescuer has a special push button to release the pressure before opening, so it does not use the filling valve itself for emptying.
It also has a three-color indicator.
ergonomics
Ball Rescuer weighs only 150 grams and takes up minimal space in your bag.
It is more convenient and easier to open and close than any other.
It adapts to 3 or 4 ball containers according to your needs, thus minimizing the volume.
Check compatibility.
It''s inexpensive, beautiful, and environmentally friendly.
How does it work?
01 Attach the Ball Rescuer to a compatible ball container.
02 Place the balls inside the container.
03 Close the lid by means of the thread, making sure to tighten it well.
04 Place the mouth of the inflation pump on the filling valve.
05 Inflate to the desired pressure according to the pressure indicator.
100% Compatible Brands
Adaptable to plastic packaging
Ball Rescurer is a ball pressurizer compatible with the plastic containers of tennis and padel balls that allows you to turn them into a pressurizing canister that multiplies the life of your balls by 10.
Simply buy a compatible type of packaging once and use it with any other brand of balls.
The same container can be pressurized hundreds of times.
Head Padel Pro S, Head Padel, Head Championship, Head Radical, Siux Match, Siux Match Pro, Penn Coach. Softee Speed Pro, Softee Speed, Softee Pro X and Softee Pro, HBL Protour Padel, Higer Padel Slam, Nexus Open Padel,
95% compatible
Dunlop Padel Tournament Quality, Dunlop Team Padel, Dunlop Pro Tour 3 & 4 Ball, Slazenger Club Padel, Slazenger Championship Hydroguard (3 & 4 Balls) Slazenger Max Padel, Slazenger, Donnay Championship.
Models with 95% compatibility are narrower and have to be regrown with twenty or thirty turns of duct tape under the indentation in the neck of the container in order to work at 100%.
Packaging currently not compatible for safety reasons: Wilson, Bullpadel, Babolat, Tecnifibre, Nox, Artengo, Adidas and Varlion, although they are not the only ones.
Not compatible with metal containers or cans.
Models of compatible brands that cannot be pressurized or experience leaks after hours:
Dunlop Tour Brilliance. The body of the container is too narrow and when pressurized it is off-center with respect to the flange.
To avoid this, roll up electrical tape to thicken the diameter until it fits the flange. Even so, it will be difficult to pressurize, better to choose another model.
Dunlop Pro Padel. It can be pressurized but usually has pressure losses.
Head Padel Pro. Wide containers cannot be pressurized, it can be measured with the flange before purchasing.
-120x120.jpg)
(0)