The Ball Rescuer ball pressurizer consists of two threaded bodies made of plastic, a lid and a flange or clamp.
The lid is characterized by two valves, one main for air filling and a secondary one for coupling a pressure indicator.
The lid also has a drain button to open the pot comfortably before using the balls.
In addition, the lid has inside a special O-ring that allows pressurizing almost any container of balls on the market.
The flange is the piece that hugs the container and that once placed around it allows it to be threaded to the lid and pressurized.
Small size light weight easy opening
It adapts to several of the brands of containers of 3 or 4 balls.
See compatibility guide below.
It is capable of storing 3 or 4 balls at a pressure of up to 35 psi, extending its service life up to 10 times.
Recovers depressurized balls (it is noted that the process may take 2 or 3 weeks)
Playing two games a week, the investment pays for itself in three months.
In five years it avoids the manufacture and subsequent disposal of 1,200 balls and 300 containers.
Save raw materials and reduce emissions.
Made of light and resistant material.
Easy to use.
Contains detailed pressurization instructions.
Patented, manufactured and assembled in Spain.
high pressure
Ball Rescuer works at a pressure of 30/35 psi.
Valveless thread pressurizers that only give 14/16 psi do not work well.
In addition, Ball Rescuer has a special push button to release pressure before opening it, so it does not use the filling valve itself for emptying.
It also has a three-color indicator.
ergonomics
Ball Rescuer weighs only 150 grams and takes up minimal space in your bag.
It is more comfortable and easier to open and close than any other.
It adapts to containers of 3 or 4 balls according to your needs, thus minimizing the volume.
Check compatibility.
It is economical, beautiful and environmentally friendly.
How does it work?
01 Attach the Ball Rescuer to a compatible ball container.
02 Introduce the balls into the container.
03 Close the lid using the thread, making sure to tighten it well.
04 Place the mouth of the inflating pump on the filling valve.
05 Inflate to the desired pressure according to pressure indicator.
100% compatible brands
Adaptable to plastic packaging
Ball Rescurer is a ball pressurizer compatible with plastic containers of tennis and paddle balls that allows you to convert them into a pressurizing canister that multiplies by 10 the life of your balls.
It is enough to buy a single type of compatible packaging once and use it with any other brand of balls.
The same container can be pressurized hundreds of times.
Head Padel Pro S, Head Padel, Head Championship, Head Radical, Siux Match, Siux Match Pro, Penn Coach. Softee Speed Pro, Softee Speed, Softee Pro X and Softee Pro, HBL Protour Padel, Higer Padel Slam, Nexus Open Padel,
95% compatible
Dunlop Padel Tournament Quality, Dunlop Team Padel, Dunlop Pro Tour of 3 and 4 balls, Slazenger Club Padel, Slazenger Championship Hydroguard (3 and 4 balls) Slazenger Max Padel, Slazenger, Donnay Championship.
Models with 95% compatibility are narrower and to work at 100% they have to be regrown with twenty or thirty turns of packing tape below the cleft of the neck of the container.
Containers currently not compatible for safety reasons: Wilson, Bullpadel, Babolat, Tecnifibre, Nox, Artengo, Adidas and Varlion, although they are not the only ones.
Not compatible with metal containers or cans.
Models of compatible brands that cannot be pressurized or experience losses after hours:
Dunlop Tour Brilliance. The body of the container is too narrow and when pressurized it decenters with respect to the flange.
To avoid this, roll up insulating tape to thicken the diameter until it fits the flange. Even so, it will be difficult to pressurize, better to choose another model.
Dunlop Pro Padel. It can be pressurized but usually has pressure losses.
Head Padel Pro. Wide containers cannot be pressurized, it can be measured with the flange before buying.
-120x120.jpg)
(0)